4 Tips for Repairing Your Air Conditioning on Your Own
Posted on: 15 July 2024
Summer is here, and with it comes the scorching heat. The last thing you want is for your air conditioning to break down during a heatwave. But before you call a professional and spend a fortune on repairs, there are some simple steps to try fixing your AC unit yourself. With a little bit of know-how and these four tips, you may be able to get your air conditioning up and running again in no time.
Check the Power Source
When your air conditioning stops working, the first thing you should do is check the power source. Make sure the unit is plugged in properly and that there are no blown fuses or tripped circuit breakers. If everything seems to be in order, try resetting the circuit breaker or replacing any blown fuses. This simple step may solve your problem without having to do anything else.
Clean or Replace the Air Filter
A dirty or clogged air filter can cause your air conditioning system to work harder than it needs to, which can lead to breakdowns. It's important to regularly clean or replace your air filter, especially during peak usage months. To clean the filter, simply remove it from the unit and gently wash it with warm water and soap, then let it dry completely before putting it back in place. If your filter is damaged or too dirty to clean, replace it with a new one.
Check for Ice Build-Up
If your AC unit is not cooling properly, there may be ice build-up on the evaporator coils. This can happen if there are low refrigerant levels or restricted airflow due to a dirty air filter or blocked vents. To check for ice build-up, turn off your AC unit and let it defrost completely before turning it back on again. If the problem persists, it's best to call a professional.
Clean the Condenser Unit
The condenser unit is located outside and can become clogged with dirt, leaves, and other debris. This can cause your AC unit to work harder and less efficiently. To clean the condenser unit, turn off the power source and remove any debris from around the unit. Then, use a garden hose to gently spray water on the coils and fins to remove any dirt or build-up. Be careful not to use too much pressure, as this could damage the fins.
For more information, reach out to a local service, such as B & H Heating and Air.
Share